 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CPC1009N 4-Pin SOP OptoMOS(R) Relay Parameter Load Voltage Load Current Max On-Resistance Output Leakage, Off-State Ratings 100 150 8 20 Units VP mA nA Description CPC1009N is a miniature low voltage, low on-resistance, low off-state leakage, 1-Form-A solid state relay in a 4-Pin SOP package. The MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture to provide 1500 Vrms of input-to-output isolation. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. The CPC1009N uses Clare's state of the art double-molded vertical construction to produce one of the world's smallest 4-pin relays, which offers board space savings of 20% over the competitor's larger 4-pin SOP relay. Approvals * UL Recognized Component: File # E76270 * EN/IEC 60950 Compliant Features * Extremely Low Output Leakage * 1500Vrms Input/Output Isolation * Small 4-Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security Systems * Aerospace * Industrial Controls Ordering Information Part # CPC1009N CPC1009NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control 1 4 Load - Control 2 3 Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1009N-R03 CPC1009N Absolute Maximum Ratings (@ 25C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total PowerDissipation 1 Isolation voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 100 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / C Electrical Characteristics Parameter Conditions Output Characteristics @ 25C (Unless otherwise noted) Load Current Continuous 1 Peak t = 10ms On-Resistance 2 IL=150mA Off-State Leakage Current VL=100VP , T=115C Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off IF=5mA, VL=10V Output Capacitance 50V, f=1MHz Input Characteristics @ 25C Input Control Current IL=150mA Input Dropout Current Input Voltage Drop IF=5mA Reverse Input Current VR=5V Input/Output Characteristics @ 25C Capacitance Input to Output 1 2 Symbol Min Typ Max Units IL ILPK RON ILEAK tON tOFF COUT IF IF VF IR - 0.3 0.9 - 5 25 0.87 0.86 1.2 1 150 350 8 20 2 0.5 2 1.4 10 - mA nA ms pF mA mA V A pF Load current derates linearly from 150mA @ 25oC to120mA @85oC. Measurement taken within 1 second of on time. 2 www.clare.com R03 CPC1009N PERFORMANCE DATA* Typical LED Forward Voltage Drop (TA=25C, IF=5mA) 35 30 Device Count (N) 25 20 15 10 5 0 Device Count (N) 4.40 4.60 4.80 5.00 5.20 5.40 5.60 35 30 Device Count (N) Typical On-Resistance Distribution (TA=25C, IL=150mA) 35 30 25 20 15 10 5 0 Typical Blocking Voltage Distribution (TA=25C) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 106 109 On-Resistance () 112 115 118 121 Blocking Voltage (VP) 124 25 20 15 10 5 0 Typical IF for Switch Operation (TA=25C, IL=100mA) 25 20 15 10 5 0 Typical IF for Switch Dropout (TA=25C, IL=100mA) 25 20 15 10 5 0 Typical Turn-On Time (TA=25C, IL=150mA, IF=5mA) Device Count (N) 0.75 0.80 0.85 0.90 0.95 LED Current (mA) 1.00 1.05 Device Count (N) Device Count (N) 0.70 0.75 0.80 0.85 0.90 0.95 1.00 0.25 0.30 LED Current (mA) 0.35 0.40 0.45 Turn-On (ms) 0.50 0.55 25 20 15 10 5 0 Typical Turn-Off Time (TA=25C, IL=150mA, IF=5mA) Load Current (mA) Typical Maximum Load Current vs. Temperature 190 180 170 160 150 140 130 120 110 100 IF=10mA IF=5mA Leakage (nA) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 -40 -20 0 20 40 60 80 100 120 0 -20 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=100VP) Device Count (N) 0.21 0.22 0.23 0.24 0.25 Turn-Off (ms) 0.26 0.27 0 20 40 60 80 100 120 Temperature (C) Temperature (C) Typical Blocking Voltage vs. Temperature 122 Blocking Voltage (VP) 121 Turn-On (ms) 120 119 118 117 116 115 -40 -20 0 20 40 60 Temperature (C) 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 Typical Turn-On vs. Temperature (IL=100mA) IF=5mA IF=10mA 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 Typical Turn-Off vs. Temperature (IL=100mA) Turn-Off (ms) IF=10mA IF=5mA -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1009N PERFORMANCE DATA* Typical Turn-On vs. LED Forward Current (TA=25C, IL=120mA) On-Resistance () Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (C) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 12 10 8 Typical On-Resistance vs. Temperature (IL=150mA) IF=5mA IF=10mA IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA Steady State 6 4 2 Instantaneous IF=5mA 10 15 20 25 30 35 40 45 50 0 -40 -20 0 20 40 60 80 100 LED Forward Current (mA) Temperature (C) 0.7 0.6 Typical Turn-Off vs. LED Forward Current (TA=25C, IL=120mA) Typical IF for Switch Operation vs. Temperature (IL=100mA) 3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0 LED Current (mA) 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 -40 Typical IF for Switch Dropout vs. Temperature (IL=100mA) Turn-On (ms) 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) -20 0 20 40 60 80 100 Temperature (C) Temperature (C) 150 Load Current (mA) 100 50 0 -50 -100 Typical Load Current vs. Load Voltage (TA=25C, IF=5mA) -150 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 Load Voltage (V) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time Energy Rating Curve (TA=25C) Load Current (A) 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 CPC1009N Manufacturing Information Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package 4.089 0.203 (0.161 0.008) 0.200 0.025 (0.008 0.001) Pb RoHS 2002/95/EC e3 Recommended PCB Land Pattern 0.60 (0.0217) 3.810 0.076 (0.150 0.003) Pin 1 2.54 Typ (0.100 Typ) 2.184 Max (0.086 Max) 6.096 0.102 (0.240 0.004) 1.02 0.025 (0.040 0.001) 0.432 0.127 (0.017 0.005) 1.30 (0.0512) 2.54 (0.10) 5.60 (0.2205) 0.0254 - 0.102 (0.001 - 0.004) 0.381 TYP. (0.015 TYP.) Dimensions mm (inches) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) B0=4.70 (0.185) Pin 1 K0=2.70 (0.106) K1=2.30 (0.091) Embossed Carrier P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1009N-R03 (c)Copyright 2008, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 12/11/08 5 |
Price & Availability of CPC1009N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |